BETA test for 29bit init protocol

User avatar
admin
Site Admin
Posts: 544
Joined: Sun Jun 02, 2019 10:58 pm

Re: BETA test for 29bit init protocol

Post by admin » Tue Oct 01, 2024 1:29 pm

Putting the sharing link directly here in the text? doesn't work?

misiakpb
Posts: 26
Joined: Thu Nov 19, 2020 9:28 am

Re: BETA test for 29bit init protocol

Post by misiakpb » Wed Oct 02, 2024 6:33 pm

Hi toady test with DSUD app version 3.34.12
Attachments
Screenshot_2024-10-02-17-18-35-978_com.applagapp.vagdpf.jpg
Screenshot_2024-10-02-17-18-33-169_com.applagapp.vagdpf.jpg
Screenshot_2024-10-02-17-18-25-144_com.applagapp.vagdpf.jpg
Screenshot_2024-10-02-17-17-45-176_com.applagapp.vagdpf.jpg

glowas
Posts: 13
Joined: Thu Jul 13, 2023 11:20 pm

Re: BETA test for 29bit init protocol

Post by glowas » Wed Oct 02, 2024 9:04 pm

My Octavia 2023 DTUA engine:

Group 18:
Screenshot_2024-09-28-15-15-05-003_com.applagapp.vagdpf.jpg
Group 97:
Screenshot_97_2024-09-28-15-14-36-544_com.applagapp.vagdpf.jpg
Hope this help anyhow.

gusiak11
Posts: 11
Joined: Thu Sep 12, 2024 10:27 am

Re: BETA test for 29bit init protocol

Post by gusiak11 » Thu Oct 03, 2024 9:30 am

Hey
Yesterday I had the opportunity to read the error displayed again
group 97 DTUA engine


Communication error
Unable to communicate with engine ECU even with OBD2 protocol
Possible causes: - Car ignition off - ELM327 faulty or bad quality - Car not OBD2 compliant
*BETA-29bit-CANID*
41 54505046464F4646A0ATPPFFOF
FOK12
41545AA0ATZELM327V2312
415444A0ATDOK12
41545043A0ATPCOK12
41544530A0ATE0OK12
41545330A0OK12
41544C30A0OK12
4154415431A0OK12
41544D30A0OK12
41544831A0OK12
4154535036A0OK12
30313030D07E9064100981800017
E8064100981B801369
41 545348374530D0OK69
31303033FE7E8037F101171
31303033FE7E8037F101171
31303033FE7E8037F101171
31303033FE7E8037F101171
323246313837FE7E8037F221171
323246313837FE7E8037F221171
323246313837FE7E8037F221171
323246313837FE7E8037F221171
323246313837FE7E8037F221171
323246313839FE7E8037F221171
323246313839FE7E8037F221171
323246313839FE7E8037F221171
323246313839FE7E8037F221171
323246313931FE7E8037F221171
323246313931FE7E8037F221171
323246313931FE7E8037F221171
323246313931FE7E8037F221171
323246314144FE7E8037F221171
323246314144FE7E8037F221171
323246314144FE7E8037F221171
323246314144FE7E8037F221171
323246313937FE7E8037F221171
323246313937FE7E8037F221171
323246313937FE7E8037F221171
323246313937FE7E8037F221171
30393032FF7E81014490201544D4
27E8214C4B374E58314E7E822593
0393939373544
323246383032FE7E8037F221171
323246383032FE7E8037F221171
323246383032FE7E8037F221171
323246383032FE7E8037F221171
4154505046464F4646A0OK12
41545AA0ELM327V2312
415444A0ATDOK12
41545043A0ATPCOK12
41544530AOATEOOK12
41545330A0OK12
41544C30A0OK12
4154415431A0OK12
41544D30A0OK12
41544831A0OK12
4154535037A0OK12
30313030D1NODATA42
30313030D1NODATA42
30313030D1NODATA42
30313030D1NODATA42
415453483138444130314631D0OK
69

CLOSE



here are links to the original screenshots

https://drive.google.com/file/d/14roEbk ... sp=sharing
https://drive.google.com/file/d/14sNbFE ... sp=sharing
https://drive.google.com/file/d/14uDvAZ ... sp=sharing

I hope it helps

glowas
Posts: 13
Joined: Thu Jul 13, 2023 11:20 pm

Re: BETA test for 29bit init protocol

Post by glowas » Thu Oct 03, 2024 10:33 pm

gusiak11 wrote:
Thu Oct 03, 2024 9:30 am
Hey
Yesterday I had the opportunity to read the error displayed again
group 97 DTUA engine
...
What type of interface are you using?
As we do have the same car with engine but difference is model year and outputs seems to be different as well.

I am using V-GATE.

gusiak11
Posts: 11
Joined: Thu Sep 12, 2024 10:27 am

Re: BETA test for 29bit init protocol

Post by gusiak11 » Fri Oct 04, 2024 1:19 pm

I also use V-gate
in the 2017 Superb with the DFTA engine it works very well, but the coding is different.
I'm counting on a quick solution to the communication problem with DTUA coding, because unfortunately today's ecology is killing the engine so much that we need to have control over our DPF.

User avatar
admin
Site Admin
Posts: 544
Joined: Sun Jun 02, 2019 10:58 pm

Re: BETA test for 29bit init protocol

Post by admin » Sat Oct 05, 2024 10:01 am

With your feedbacks, these new releases

VAG DPF 3.35.12
VAG DPF Lite 2.27.4

have been published with improved initialization compatibility and more details in the error log.

Tomanic
Posts: 7
Joined: Sat Sep 21, 2024 9:38 pm

Re: BETA test for 29bit init protocol

Post by Tomanic » Sun Oct 06, 2024 4:04 pm

Attaching log from the updated app (DXNB engine)
Attachments
2.jpg
1.jpg

premium
Posts: 1
Joined: Tue Mar 12, 2024 7:27 am

Re: BETA test for 29bit init protocol

Post by premium » Mon Oct 07, 2024 3:35 pm

DTTA engine
Attachments
Screenshot_2024-10-07-15-22-35-11.jpg

gusiak11
Posts: 11
Joined: Thu Sep 12, 2024 10:27 am

Re: BETA test for 29bit init protocol

Post by gusiak11 » Wed Oct 09, 2024 9:22 pm

Today another attempt to connect to the DPF in DTUA
program version 3.35.12

I received this message
*BETA-29bit-CANID*
4154505046464F4646I2LATPPFFOF
F\rOKir\r>Y
41545AI2LATZ\r\r\rELM327
V2.3\r\r>Y
415444I2LATD\rrOK\r\r>Y
41545043I2LATPC\rOK1rlr>Y
41 544530I2LATEO\rOKIr\ r>Y
41545330I2LOK\r\r>Y 41544C30I2LOK\r\r>Y
4154415431I2LOK\r\r>Y
41544D30I2LOK\rAr>Y
41544831I2LOK\rr>Y
4154535037I2LOK\n\r>Y
3031 3030G1HNO DATA\r\r>X
30313030G1HNO DATA \r\r>
4154464353483138444130314631 G1HO
K\r\r>X
41 5446435344333030303030G1
HO Klr\r>X
41 544643534D31
G1HOK\r\r>X
4154414CG1OKIrr>X

I skipped the beginning because it's always the same
anticipating questions, today there was only one screen, there was nothing else

I am posting a link to the screenshots
https://drive.google.com/file/d/15vdt3L ... sp=sharing
https://drive.google.com/file/d/15vM3NQ ... sp=sharing

User avatar
admin
Site Admin
Posts: 544
Joined: Sun Jun 02, 2019 10:58 pm

Re: BETA test for 29bit init protocol

Post by admin » Thu Oct 10, 2024 12:05 pm

I'm near to release another update, probably today or tomorrow morning.
I'm confident we can make another step

thanks!!

misiakpb
Posts: 26
Joined: Thu Nov 19, 2020 9:28 am

Re: BETA test for 29bit init protocol

Post by misiakpb » Thu Oct 10, 2024 5:32 pm

v 3.36.12
DSUD
Unable to communicate with engine ECU even with OBD2 protocol.

Possible causes:
- Car ignition off
- ELM327 faulty or bad quality
- Car not OBD2 compliant

**BETA-29bit-CANID**
4154505046464F4646I2LOK\r\r>Y
41545AI2L\r\rELM327 v1.5\r\r>Y
415444I2LATD\r\rOK\r\r>Y
41545043I2LATPC\rOK\r\r>Y
41544530I2LATE0\rOK\r\r>Y
41545330I2LOK\r\r>Y
41544C30I2LOK\r\r>Y
4154415431I2LOK\r\r>Y
41544D30I2LOK\r\r>Y
41544831I2LOK\r\r>Y
4154535037I2LOK\r\r>Y
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
415453483137464330303736G1H?\r\r>X
415453483137464330303736G1H?\r\r>X
415453483137464330303736G1H?\r\r>X
415453483137464330303736G1H?\r\r>X
41544352413137464530303736G1HOK\r\r>X
4154464353483137464330303736G1HOK\r\r>X
415446435344333030303030G1HOK\r\r>X
41544643534D31G1HOK\r\r>X
4154414CG1HOK\r\r>X

Second connection
Unable to communicate with engine ECU even with OBD2 protocol.

Possible causes:
- Car ignition off
- ELM327 faulty or bad quality
- Car not OBD2 compliant

**BETA-29bit-CANID**
4154505046464F4646I2LOK\r\r>Y
41545AI2L\r\rELM327 v1.5\r\r>Y
415444I2LATD\r\rOK\r\r>Y
41545043I2LATPC\rOK\r\r>Y
41544530I2LATE0\rOK\r\r>Y
41545330I2LOK\r\r>Y
41544C30I2LOK\r\r>Y
4154415431I2LOK\r\r>Y
41544D30I2LOK\r\r>Y
41544831I2LOK\r\r>Y
4154535037I2LOK\r\r>Y
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
415453483137464330303736G1H?\r\r>X
415453483137464330303736G1H?\r\r>X
415453483137464330303736G1H?\r\r>X
415453483137464330303736G1H?\r\r>X
41544352413137464530303736G1HOK\r\r>X
4154464353483137464330303736G1HOK\r\r>X
415446435344333030303030G1HOK\r\r>X
41544643534D31G1HOK\r\r>X
4154414CG1HOK\r\r>X
4154505046464F4646I2LOK\r\r>Y
41545AI2L\r\rELM327 v1.5\r\r>Y
415444I2LATD\r\rOK\r\r>Y
41545043I2LATPC\rOK\r\r>Y
41544530I2LATE0\rOK\r\r>Y
41545330I2LOK\r\r>Y
41544C30I2LOK\r\r>Y
4154415431I2LOK\r\r>Y
41544D30I2LOK\r\r>Y
41544831I2LOK\r\r>Y
4154535037I2LOK\r\r>Y
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
415453483137464330303736G1H?\r\r>X
415453483137464330303736G1H?\r\r>X
415453483137464330303736G1H?\r\r>X
415453483137464330303736G1H?\r\r>X
41544352413137464530303736G1HOK\r\r>X
4154464353483137464330303736G1HOK\r\r>X
415446435344333030303030G1HOK\r\r>X
41544643534D31G1HOK\r\r>X
4154414CG1HOK\r\r>X
4154505046464F4646I2LOK\r\r>Y
41545AI2L\r\rELM327 v1.5\r\r>Y
415444I2LATD\r\rOK\r\r>Y
41545043I2LATPC\rOK\r\r>Y
41544530I2LATE0\rOK\r\r>Y
41545330I2LOK\r\r>Y
41544C30I2LOK\r\r>Y
4154415431I2LOK\r\r>Y
41544D30I2LOK\r\r>Y
41544831I2LOK\r\r>Y
4154535037I2LOK\r\r>Y
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
415453483137464330303736G1H?\r\r>X
415453483137464330303736G1H?\r\r>X
415453483137464330303736G1H?\r\r>X
415453483137464330303736G1H?\r\r>X
41544352413137464530303736G1HOK\r\r>X
4154464353483137464330303736G1HOK\r\r>X
415446435344333030303030G1HOK\r\r>X
41544643534D31G1HOK\r\r>X
4154414CG1HOK\r\r>X

Tomanic
Posts: 7
Joined: Sat Sep 21, 2024 9:38 pm

Re: BETA test for 29bit init protocol

Post by Tomanic » Thu Oct 10, 2024 9:13 pm

I was able to connect with the new version 3.36.12! (DXNB)
Attachments
DXNB.jpg

User avatar
admin
Site Admin
Posts: 544
Joined: Sun Jun 02, 2019 10:58 pm

Re: BETA test for 29bit init protocol

Post by admin » Thu Oct 10, 2024 9:57 pm

This is a super good news!

The app can talk with the ECU using the 29bit initialization protocol, at least to receive the engine type and sw/hw version.

Unfortunately no DPF data can be read and I have to understand if there's an error in the code or maybe the setup for DTTC is completely different from your DXNB.
Usually when the parameter setup isn't compatible, the error counter shows 12 errors corresponding to the 12 unread fields, but in your picture there aren't errors shown, so I think something in the code is wrong. I check.

User avatar
admin
Site Admin
Posts: 544
Joined: Sun Jun 02, 2019 10:58 pm

Re: BETA test for 29bit init protocol

Post by admin » Thu Oct 10, 2024 10:45 pm

In fact it was a stupid error in a single line.

New release 3.37.12 published.

Tomanic
Posts: 7
Joined: Sat Sep 21, 2024 9:38 pm

Re: BETA test for 29bit init protocol

Post by Tomanic » Fri Oct 11, 2024 4:40 pm

Great work, with new version 3.37.12 I can connect and get all readings for DXNB!
Attachments
DXNB.jpg

misiakpb
Posts: 26
Joined: Thu Nov 19, 2020 9:28 am

Re: BETA test for 29bit init protocol

Post by misiakpb » Fri Oct 11, 2024 5:34 pm

v 3.37.12 DSUD
Unable to communicate with engine ECU even with OBD2 protocol.

Unable to communicate with engine ECU even with OBD2 protocol.

Possible causes:
- Car ignition off
- ELM327 faulty or bad quality
- Car not OBD2 compliant

**BETA-29bit-CANID**
4154505046464F4646I2LOK\r\r>Y
41545AI2L�\r\rELM327 v2.1\r\r>Y
415444I2LATD\r\rOK\r\r>Y
41545043I2LATPC\rOK\r\r>Y
41544530I2LATE0\rOK\r\r>Y
41545330I2LOK\r\r>Y
41544C30I2LOK\r\r>Y
4154415431I2LOK\r\r>Y
41544D30I2LOK\r\r>Y
41544831I2LOK\r\r>Y
4154535037I2LOK\r\r>Y
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
415453483137464330303736G1HOK\r\r>X
41544352413137464530303736G1HOK\r\r>X
4154464353483137464330303736G1HOK\r\r>X
415446435344333030303030G1HOK\r\r>X
41544643534D31G1HOK\r\r>X
4154414CG1HOK\r\r>X

and 2 fail
Possible causes:
- Car ignition off
- ELM327 faulty or bad quality
- Car not OBD2 compliant

**BETA-29bit-CANID**
415 4505046464F4646I2LOK\r\r>Y
41545AI2L�\r\rELM327 v2.1\r\r>Y
415444I2LATD\r\rOK\r\r>Y
41545043I2LATPC\rOK\r\r>Y
41544530I2LATE0\rOK\r\r>Y
41545330I2LOK\r\r>Y
41544C30I2LOK\r\r>Y
4154415431I2LOK\r\r>Y
41544D30I2LOK\r\r>Y
41544831I2LOK\r\r>Y
4154535036I2LOK\r\r>Y
30313030G1H7E8064100981BA013\r\r>X
41545348374530G1HOK\r\r>X
31303033M3N7E8037F1011\r\r>Z
31303033M3N7E8037F1011\r\r>Z
31303033M3N7E8037F1011\r\r>Z
31303033M3N7E8037F1011\r\r>Z
323246313837M3N7E8037F2211\r\rZ
323246313837M3N>Z
323246313837M3N7E8037F2211\r\r>Z
323246313837M3N7E8037F2211\r\rZ
323246313837M3N>Z
323246313837M3N7E8037F2211\r\r>Z
323246313839M3N7E8037F2211\r\r>Z
323246313839M3N7E8037F2211\r\rZ
323246313839M3N>Z
323246313839M3N7E8037F2211\r\r>Z
323246313839M3N7E8037F2211\r\r>Z
323246313931M3N7E8037F2211\r\r>Z
323246313931M3N7E8037F2211\r\r>Z
323246313931M3N7E8037F2211\r\r>Z
323246313931M3N7E8037F2211\r\r>Z
323246314144M3N7E8037F2211\r\r>Z
323246314144M3N7E8037F2211\r\r>Z
323246314144M3N7E8037F2211\r\r>Z
323246314144M3N7E8037F2211\r\r>Z
323246313937M3N7E8037F2211\r\r>Z
323246313937M3N7E8037F2211\r\r>Z
323246313937M3N7E8037F2211\r\r>Z
323246313937M3N7E8037F2211\r\r>Z
30393032M3N7E81014490201544D42\r7E8214A47374E58304C\r7E82259303237343435\r\r>Z
323246383032M3N7E8037F2211\r\rZ
323246383032M3N>Z
323246383032M3N7E8037F2211\r\r>Z
323246383032M3N7E8037F2211\r\r>Z
323246383032M3N7E8037F2211\r\r>Z
4154505046464F4646I2LOK\r\r>Y
41545AI2L�\r\rELM327 v2.1\r\r>Y
415444I2LATD\r\rOK\r\r>Y
41545043I2LATPC\rOK\r\r>Y
41544530I2LATE0\rOK\r\r>Y
41545330I2LOK\r\r>Y
41544C30I2LOK\r\r>Y
4154415431I2LOK\r\r>Y
41544D30I2LOK\r\r>Y
41544831I2LOK\r\r>Y
4154535037I2LOK\r\r>Y
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\rX
30313030G1H>X
30313030G1HNO DATA\r\r>X
415453483137464330303736G1HOK\r\r>X
41544352413137464530303736G1HOK\r\r>X
4154464353483137464330303736G1HOK\r\r>X
415446435344333030303030G1HOK\r\r>X
41544643534D31G1HOK\r\r>X
4154414CG1HOK\r\r>X
4154505046464F4646I2LOK\r\r>Y
41545AI2L�\r\rELM327 v2.1\r\r>Y
415444I2LATD\r\rOK\r\r>Y
41545043I2LATPC\rOK\r\r>Y
41544530I2LATE0\rOK\r\r>Y
41545330I2LOK\r\r>Y
41544C30I2LOK\r\r>Y
4154415431I2LOK\r\r>Y
41544D30I2LOK\r\r>Y
41544831I2LOK\r\r>Y
4154535037I2LOK\r\r>Y
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\rX
30313030G1H>X
30313030G1HNO DATA\r\rX
30313030G1H>X
30313030G1HNO DATA\r\r>X
415453483137464330303736G1HOK\r\r>X
41544352413137464530303736G1HOK\r\r>X
4154464353483137464330303736G1HOK\r\r>X
415446435344333030303030G1HOK\r\r>X
41544643534D31G1HOK\r\r>X
4154414CG1HOK\r\r>X

jbsc
Posts: 2
Joined: Sat Oct 12, 2024 2:09 pm

Re: BETA test for 29bit init protocol

Post by jbsc » Sat Oct 12, 2024 5:22 pm

Hi,
I have checked the application with 2023 Audi Q5 Sportback 40 TDI, engine code DTPA
App version 3.37.12, engine group 97
Here is the error message:

Unable to communicate with engine ECU even with OBD2 protocol.

Possible causes:
- Car ignition off
- ELM327 faulty or bad quality
- Car not OBD2 compliant
**BETA-29bit-CANID**
4154505046464F4646I2LATPPFFOFF\rOK\r\r>Y
41545AI2LATZ\r\r\rELM327 v2.2\r\r>Y
415444I2LATD\r\rOK\r\r>Y
41545043I2LATPC\rOK\r\r>Y
41544530I2LATE0\rOK\r\r>Y
41545330I2LOK\r\r>Y
41544C30I2LOK\r\r>Y
4154415431I2LOK\r\r>Y
41544D30I2LOK\r\r>Y
41544831I2LOK\r\r>Y
4154535036I2LOK\r\r>Y
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
41545348374530G1HOK\r\r>X
4154505046464F4646I2LOK\r\r>Y
41545AI2L\r\rELM327 v2.2\r\r>Y
415444I2LATD\r\rOK\r\r>Y
41545043I2LATPC\rOK\r\r>Y
41544530I2LATE0\rOK\r\r>Y
41545330I2LOK\r\r>Y
41544C30I2LOK\r\r>Y
4154415431I2LOK\r\r>Y
41544D30I2LOK\r\r>Y
41544831I2LOK\r\r>Y
4154535036I2LOK\r\r>Y
30313030G1H7E906410098180001\r7E8064100981B8013\r\r>X
41545348374530G1HOK\r\r>X
31303033M3N7E8065003001E01E0\r\r>Z
323246313837M3N7E8100E62F18730354C\r7E82139303630323743\r7E82247000000000000\r\r>Z
323246313839M3N7E80762F18931373233\r\r>Z
323246313931M3N7E8037F2278\r7E8100E62F19130354C\r7E82139303733303953\r7E82220000000000000\r\r>Z
323246314144M3N7E80762F1AD44545041\r\r>Z
323246313937M3N7E8101062F197523420\r7E821322E306C205444\r7E82249202000000000\r\r>Z
30393032M3N7E81014490201574155\r7E8215A5A5A46595850\r7E82232303637393630\r\r>Z
323246383032M3N7E8101562F802015741\r7E821555A5A5A465958\r7E82250323036373936\r7E82330000000000000\r\r>Z
4154505046464F4646I2LOK\r\r>Y
41545AI2L\r\rELM327 v2.2\r\r>Y
415444I2LATD\r\rOK\r\r>Y
41545043I2LATPC\rOK\r\r>Y
41544530I2LATE0\rOK\r\r>Y
41545330I2LOK\r\r>Y
41544C30I2LOK\r\r>Y
4154415431I2LOK\r\r>Y
41544D30I2LOK\r\r>Y
41544831I2LOK\r\r>Y
4154535037I2LOK\r\r>Y
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
415453483137464330303736G1HOK\r\r>X
41544352413137464530303736G1HOK\r\r>X
4154464353483137464330303736G1HOK\r\r>X
415446435344333030303030G1HOK\r\r>X
41544643534D31G1HOK\r\r>X
4154414CG1HOK\r\r>X
4154505046464F4646I2LOK\r\r>Y
41545AI2L\r\rELM327 v2.2\r\r>Y
415444I2LATD\r\rOK\r\r>Y
41545043I2LATPC\rOK\r\r>Y
41544530I2LATE0\rOK\r\r>Y
41545330I2LOK\r\r>Y
41544C30I2LOK\r\r>Y
4154415431I2LOK\r\r>Y
41544D30I2LOK\r\r>Y
41544831I2LOK\r\r>Y
4154535037I2LOK\r\r>Y
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
30313030G1HNO DATA\r\r>X
415453483137464330303736G1HOK\r\r>X
41544352413137464530303736G1HOK\r\r>X
4154464353483137464330303736G1HOK\r\r>X
415446435344333030303030G1HOK\r\r>X
41544643534D31G1HOK\r\r>X
4154414CG1HOK\r\r>X

glowas
Posts: 13
Joined: Thu Jul 13, 2023 11:20 pm

Re: BETA test for 29bit init protocol

Post by glowas » Sat Oct 12, 2024 11:18 pm

DTUA Octavia 2023 (group 97) after latest update (version 3.37.12):
DTUA_1.jpg

User avatar
admin
Site Admin
Posts: 544
Joined: Sun Jun 02, 2019 10:58 pm

Re: BETA test for 29bit init protocol

Post by admin » Sun Oct 13, 2024 2:23 pm

Tomanic wrote:
Fri Oct 11, 2024 4:40 pm
Super!!! This is the feedback I was hoping for
Let me know if you find issues using the app.

misiakpb wrote:
Fri Oct 11, 2024 5:34 pm
jbsc wrote:
Sat Oct 12, 2024 5:22 pm
Your engine seems to respond with the 11bit canID, did you already try using the other engine groups?

glowas wrote:
Sat Oct 12, 2024 11:18 pm
Your picture is probably a part of the entire error message only, can you check again? The easier way to share the log is to copy it into the clipboard instead to take many pictures.

Post Reply